truck  Free Ground Freight on Orders Over $100 *Exclusions Apply

Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

0

Order Toll Free 1-877-375-7867

More Views

Cummins Rebuilt Celect Fuel Injector - 3411767RX

Part Number: 3411767RX
Manufacturer: Cummins
Core Charge: $400

$358.39

Quick Overview

1 Year Unlimited Mile Warranty

See Core Policy for terms and conditions.

Maximum number of characters: 8

Details

Cummins Celect Injector Cummins Celect injectors are one of the most complex and advanced injectors in use today. The advanced technology in these injectors allows for increased power, lower emissions, and better engine responsiveness. Remanufacturing Cummins Celect injectors requires sophisticated equipment to recondition not found in many smaller fuel shops. Getting a CELECT injector to original performance specifications is 20 times more complicated than ordinary injectors. In other words, you can't just clean and rebox a CELECT injector and hope for the best. Mechanical injectors have one high pressure sealing joint while CELECT injectors have ten. In addition CELECT injectors have a much tougher cleanliness requirement and are much more difficult to assemble. Even if a rebuilder could assemble a CELECT injector, they would have no idea if it worked unless they obtained very specialized testing equipment. Plus there are critical hydraulic flow specifications that must be met in order for the engine to idle properly.  If you are replacing one or two injectors, it makes sense to replace all six. Replacing all six Celect Injectors can increase overall engine performance and help to avoid potential problems, especially with higher-mileage injectors. Doing so will give you the assurance of knowing that your injectors are operating at peak efficiency to deliver maximum performance and fuel economy. Overhauls, tune-ups, and overhead set service are great times to replace your injectors. Reconditioned Cummin CELECT Injectors: Meet Cummins specifications Utilize advanced materials Incorporate state-of-the-art Cummins design technology Are continually improved and built with the most up to date specs and materials

Compatibility

Manufacturer Cummins
Year 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Make Cummins
Model No
Engine 14.0
Core Policy Selection General Core Policy
Core charge up front? No
Sub Model No
Cylinder No
Blocktype No
Design No
Valves No
Aspiration No
Engine Manufacturer No
Version N14 Cummins

Cummins

3083662
3411385
3411767
3411767NX
3411767PX

Delphi

EX631767

General Core Policy

*** OUR CORE POLICY HAS BEEN UPDATED***

As of July 2021, we have made changes to our core policy.

 

We still offer the option to waive the upfront core charge, however, due to increased security measures, if you choose this option, we must speak with you before we can process and ship your order to (1) to verify the credit card we have on file, and (2) get your authorization to charge the card if you do not return the core within 14 days.

 

We have also added a second option to help speed up processing time, where you pay the core charge upfront. If paid upfront, you will now have 60 days to return the core. We will refund the charge as soon as the core is received and accepted.

 

See more detail below.

 

Core Charge Options:

Pay Core Charge Upfront - Charge is Refundable

If you choose to pay the core charge up front, you are eligible for a refund of the core charge if you send us the old core within 60 DAYS of purchase. At purchase you will be charged the full amount for the part and the core. As soon as an acceptable core is returned, you will receive a refund to the payment method used at checkout.

 

Pay No Upfront Core Charge - Contact us to place your credit card on file

If you choose to pay no core up front, you will need to contact us to place your card on file before your order will be processed and shipped. Once the order is processed, you will have 14 DAYS to return the core before the card on file is charged the core charge. If you are unable to return the core within 14 days, you must call ahead of the 14th day to discuss options. Extensions may be granted on a case-by-case-basis.

 

Definition of Core:

  • The core is the old unit, which was replaced by the new or rebuilt item.
  • Many replacement parts such as pumps, injectors, turbochargers and high pressure oil pumps have a core charge that is associated with the part.
  • All cores must be like for like and include all parts and pieces that were received on your replacement product.
  • All cores must be returned in rebuildable condition and must be like for like to receive full credit.

Core Physical Condition:

  • No core credit will be issued for cores that have been in a fire, disassembled, or severely damaged or broken.
  • Partial core credit may be issued for cores that have been damaged, including those with a seized head and rotor, cracked housings, contamination (water, biodiesel, waste vegetable oil, etc.), or missing parts or pieces.

 

Core Return Procedure:

  1. Drain all fluids (oil, fuel, etc.) before the core is returned.
  2. Use all plastic plugs and caps received on the replacement item on the return core.
  3. Wrap in sturdy plastic bag to prevent leakage. Any wet packages may result in damaged or denied packages.
  4. Pack the core in the original box. Be sure to use any cardboard braces or internal cushioning provided.
  5. Include your purchase information together with the part, which includes either a printed email order confirmation, or a copy of the invoice included with the pump.
  6. Ship the core to:
    • The Diesel Store Core Returns
    • 1 Seidel Ct.
    • Bolingbrook, IL 60490
  7. If for any reason you have questions or concerns on the status of your core please e-mail the tracking number and invoice number to info@thedieselstore.com.

Any Questions?

Please Call Us Toll Free @ 877.375.7867 or click here to email us.

 

Revision D • 7/7/2021

© TheDieselStore.com. All Rights Reserved. v.1.2